Non-contact voltage testers and magnetic field testers

Use of contactless voltage testers

Using a contactless voltage tester, you can determine whether a
There is voltage in the line. This allows you to work safely on live devices
Unlike measuring instruments, voltage testers are not designed to measure the exact
AC voltage, but are intended only to indicate whether any voltage
can be measured. They therefore serve as protective equipment for working with electricity.

What distinguishes contactless voltage testers from conventional ones?

In contrast to conventional voltage testers, the new
Voltage testers can be used to measure contactlessly, which means that no physical contact with the
conductor must be present. Instead, the device measures the electric field strength of the
conductor and thus reduces the risk of electric shock.

Advantages of purchasing contactless voltage testers

Especially for a simple and quick voltage test, it is recommended to use a
Buy voltage testers with contactless measurement. Because usually
Such devices indicate what has been measured by means of a signal tone or signal lights and
are therefore very easy to use.

In addition, many devices are also equipped with flashlights or similar additional functions
to make work even easier.

Find the right contactless voltage tester in our Pancontrol
online-Shop!

Frequently Asked Questions

  • What is the difference between a voltage tester, a socket tester, and a fuse finder?

    A voltage tester detects voltage and, depending on the model, continuity, phase sequence, or residual current device (RCD) function; a socket tester checks the wiring of a socket; a fuse finder identifies the corresponding circuit breaker for each socket. For verification of disconnection, the two-pole voltage tester is the relevant device. The PAN Socket-Test-2 is suitable for quick socket checks, and the PAN Circuit Finder is used for circuit identification.

  • When is a fuse finder or circuit finder useful?

    A fuse finder is useful when you need to quickly identify the fuse, circuit breaker, or residual current device (RCD) associated with a wall socket. The PAN circuit finder works with a transmitter and receiver: The transmitter is plugged into the wall socket and sends a signal into the wiring, while the receiver locates the corresponding circuit breaker in the distribution board. This reduces search time during installations, maintenance, and troubleshooting in residential, commercial, and industrial buildings.

  • Can PANCONTROL voltage testers also measure DC voltage, for example in PV systems?

    Yes, selected PANCONTROL voltage testers also measure DC voltage. The PAN SolarCheck 1500V is specifically designed for photovoltaic applications and tests DC voltages up to 1500 V DC and AC voltages up to 1000 V AC. Depending on the model, the PAN Volttester 400, PAN MV-1000A, and PAN MV-1000AD also detect AC and DC voltages. Non-contact voltage testers, on the other hand, only work with AC voltage fields.

  • Which measurement category do voltage testers require for work in switchgear and on the power grid?

    For measurements within fixed building installations, at least CAT III is required; for measurements at the service entrance, on meter installations, or in areas close to the grid, CAT IV is required. Voltage and continuity testers such as the PAN MV-1000A, PAN MV-1000AD, PAN SolarCheck 1500V, or PAN Allrounder 200AD meet CAT III 1000 V / CAT IV 600 V standards and thus cover typical professional applications in electrical installation, maintenance, and industry.

  • How does a non-contact voltage tester work and what are its limitations?

    A non-contact voltage tester detects alternating electric fields on live conductors without direct contact. Devices like the PAN Voltfinder are suitable for quick preliminary checks, locating live wires, and inspecting junction boxes, cables, or devices. However, non-contact voltage testers do not replace a two-pole voltage tester for standard-compliant disconnection verifications. Furthermore, they are not suitable for DC voltages.